Yamaha Bear Tracker 250 Specs and Review 2022

Yamaha Bear Tracker 250: In an effort to simplify the U.S. distribution of its product line and to provide the highest level of flexibility in response to North American market demands, Yamaha built a modern manufacturing facility located at Newnan, Georgia. 

Yamaha Bear Tracker 250

While it’s been operating for more than three years but the U.S. facility did not develop utilitarian vehicles completely from scratch until 1999.

Yamaha Bear Tracker 250. What better way to show off the facility than by displaying a simple, well-built vehicle.

It was the Yamaha Bear Tracker 250 is Yamaha’s very first American-built ATV. The modest, but powerful four-wheeler was equipped with a unique engine brake system, rear and front racks for utilities, as well as an impressive four-stroke engine. 

The model was made from 1999 until 2004 and was immediately popular with the public.

The vehicle’s local manufacturing was proof of the reliability and quality of Yamaha products and services. 

It was a positive step for Yamaha towards a good direction. However, that’s not the only thing this manual can offer. 

Learn more about the specifications along with the most frequently encountered issues and the charming features of this classic four-wheeler.

Yamaha Bear Tracker 250

Proudly Made in the U.S.

Yamaha Bear Tracker 250 comes 16th among the all-terrain vehicles manufactured by Yamaha since the year 1980. Tri-Moto. As with other innovations from Yamaha, the Japanese manufacturer, this four-wheeler set a new standard. 

It was the initial Yamaha UTV built in the U.S. facility in Newnan, Georgia, allowing the local production of the Bear Tracker. 

The introduction from this four-wheeler was between the Grizzly 600 and the Big Bear 400. It was tough robust, versatile, and reliable and made a wonderful addition to Yamaha’s lineup of utility vehicles.

Beyond being a revolutionary vehicle and a pioneer in the field of motorsports, it is also a revolutionary vehicle.

Bear Tracker is also known under a variety of names and is often claimed to be a derivative of Timberwolf and it’s a spin-off of the Honda Big Red. 

The motor in the vehicle is able to swap out with YTM225, YTM200, YFM200, or YFM225 Many fans believe that this claim is real. 

But, that’s not the reality. Like many off-road wheelers of the ’80s and 1990s, the Bear Tracker was built with interchangeable parts like its cousins since this lets manufacturers reduce costs in the manufacture of UTVs/ATVs.

Yamaha Bear Tracker 250 Models

Yamaha Bear Tracker 250 had two trims, and seven distinct model years throughout its production run of six years between 1998 and 2003 (for 1999 and 2004 model years) specifically:

Year Model
1999 Yamaha Bear Tracker 250 YFM250XL
2000 Yamaha Bear Tracker 250 YFM250XM
2001 Yamaha Bear Tracker 250 YFM250XN
2002 Yamaha Bear Tracker 250 YFM25HXP (Camouflage)
2002 Yamaha Bear Tracker 250 YFM25XP
2003 Yamaha Bear Tracker 250 YFM25XR
2004 Yamaha Bear Tracker 250 YFM25XS

Yamaha Bear Tracker 250 Specs

  • Engine The 250 has an air-cooled four-stroke one-cylinder SOHC engine. The power mill mounted transversely has a rood-stroke ratio of 71 by 58 millimeters (2.79 2.28 inches). 2.28 inches).
  • It is equipped with a displacement of 229.6 cm3 with a compression ratio is 8.7:1 and a wet-sump oil system. A 34mm Mikuni BST Yamaha Bear Tracker carburetor, as well as a dry-type air filtration system, controls the air-fuel mix. 3.17 US gal/12 liters of gasoline that is unleaded (ideally with an 87+ pump Octane and research Octane 91+) will fill the tank of fuel to the top.
  • Lubrication The quad’s capacity for oil when disassembled will be 1.9 US quarts/1.8 liters. With no oil filter change, the capacity is 1.6 US quarts/1.5 liters. If you change the oil filter the amount is 1.7 US quarts/1.6 liters. Recommended viscosity is SAE10W-30 of Yamalube 4 4-stroke oil or its equivalent. 
  • However, depending on the climate it is possible to use either 20W-40 or 5W-30 SAE. Be sure to ensure that the engine oil you choose is API grade that is at least SJ (and without additives, modifiers, and energy Conserving labeling) to avoid slippage of the clutch or starter and poor engine performance.
  • Drivetrain – A constant five-speed mesh transmission, as well as an automatic, wet clutch system, provides energy to wheels. 
  • It features a spur gear that has an efficiency percentage of 73/22 (3.318). The left-foot-operated shaft is the final drive, with the reduction ratio of 19/18×46/11 (4.414) and a 9.5-feet turning radius that permits enhanced cornering and excellent handling.
  • Instability An ignition system that uses DC-CDI, with the electric start system as well as an auxiliary mechanical recoil back-up brings this Yamaha Bear Tracker to life. 
  • It features an AC-magneto generation system that can power accessories. 
  • The battery requires 12V 14 Ah, YB14A A2 battery that has dimensions of 5.31 3.50 x 3.50 6.94 6.94 inches (134 x 89 x 173 millimeters – L x W and H) and paired with the main fuse of 20 amp along with an NGKDR7EA with a 0.6-0.7 millimeter (0.024-0.028 in) gap.
  • tires Tubeless AT22 7-10 front tires and AT22 10-10 rear tires to steel wheels. The approved tire brands that are suitable for use with the quad include Carlisle Trail Wolf, Dunlop(r) the KT701/KT705 as well as Cheng Shin M905/M906. The pressure of the forward tire should be at least 20 to 25 kPa (0.20 kg/cm2, 2.8 psi) and 25 kPa (0.25 kg/cm2, 3.5 psi) for the rear. 
  • Keep within the limits of 2.4 Psi/17 kPa (0.17 kg/cm2) to 4.0 28 kPa/psi (0.28 kg/cm2) when airing tires. The same is true for tires. 36 psi/250 KPa (2.5 kg/cm2) is the recommended pressure to be used when placing tires beads. For better acceleration, swap the back knobbies. the Carlisle All Trail ATV tires (view the full list on Amazon).
  • Brakes – Right-hand-operated dual-disc front brakes and a left-hand-right-foot-operated rear sealed-drum brake comprise the quad’s engine braking system. You can activate the rear brakes by pressing onto the pedal on the right side of the machine or pushing the lever for brakes located on the left side of the handlebar. A parking brake gives the wheeler additional stopping power.
  • Suspension Included in the frame of the Beartracker is a strut front suspension as well as the swingarm/motocross rear and both have spring shocks made of coils. The wheel travels are 4.9 inches (125 millimeters) as well as 5.3 inches (135 millimeters) for rear and front and rear, respectively.
  • Dimensions The dimensions for the overall size for the Yamaha Bear Tracker are 76.3 inches x 39.5 44 inches (1,940 1200 x 1,005 and 1,118 mm – L W x H). The minimum clearance for ground for the ground is 5.9 inches (150 millimeters) which is the same as the wheel span of 46 inches (1,170 millimeters). 
  • Curb weight of 212 kg/467 lbs. Seat height measures 30.7 inches/780 mm. This results in a higher center of gravity. This prevents injury and allows the user to take a more extended ride in comfort.
  • Capacity The maximum load limit – which is the total weight of the items, cargo, rider, and tongue weight is 165 kg/364 pounds. The total rack capacity is 30 Kg/66lbs at the front and 45 Kg/99lbs at the rear. 
  • The load that pulls (total weight of the trailer as well as the cargo) can be 330kgf/728 lbs The maximum weight of the tongue is 15 kg/33 lbs. Is Yamaha Bear Tracker 250 also include a 2-Kg/4.4-lb storage compartment?
  • Exterior The 250 features an aluminum tube frame (with a caster angle of 4 degrees and a 20-mm trail) and a body made of plastic. The standard features include handgrips as well as rear and front fenders, as well as racks to store the transport of cargo and other items. 
  • Two headlights of 25-watts mounted on the front fenders, a tail/brake 5/21-watt light along 1.7-watt indicator lights offer a four-wheeler with light distribution. To improve visibility, switch your lighting from the standard bulbs to LED ones.

Cost of a Yamaha Bear Tracker

1999’s Yamaha Bear Tracker MSRP was $3,299; it remained unchanged for the entire model year up to 2004. The retail price for dealers as well as private sales ranges between $570 up to $2,720 for basic models (can be increased by as much as $1,200 based on the number of options). 

Consumers are able to choose which accessories to add to the package when they purchase this Bear Tracker from a dealer. Front and rear over-fenders, rear-mounted aluminum differential skid plates fairing bags for the utility rack, and a winch mount are strongly suggested. 

Make sure to include the WARN 101025 weighing 2,500 pounds VRX 25 Powersports Winch (view on Amazon) It includes a handlebar-mounted switch as well as steel wire rope.

Yamaha Bear Tracker 250 Top Speed

The maximum speed claimed by the Yamaha Bear Tracker is 45 miles per hour, but that’s not the maximum top speed. 

The engine in this utilitarian quad will often go more quickly than its suspension or running gear is capable of handling.

This is especially the case when you are riding the bike on bumpy or rough surfaces. Some people find the speed of its top speed irrelevant and others think it an issue as its 250cc equivalents such as those of Ozark, Bombardier, and Recon cause it to eat dust. 

Installing Uni vents on the lid of the airbox, putting on at least 23-inches tires, and then set it at speed of 104 will give you five mph more which puts your top speed at 50 miles per hour.

Mechanical and Electrical Issues

This section will discuss the three most important issues you could face with this Yamaha Bear Tracker

Carburetor Problems

The symptoms could be minor during idle time, but they may become apparent when you get on the gas. 

It is also possible to experience occasional acceleration or startup. Naturally, a thorough clean-up of Yamaha Bear Tracker 250 carb and petcock is among the initial steps to do. 

In some instances, however, this may not fix the problem. Based on the degree of the engine’s performance, you might have to buy a brand new intake boot and carburetor as well as check fuel lines for any obstructions or damage and replace fuel with a brand new one.

It is important to realize that not all problems with carburetors require the purchase of a new car. 

There is no need to change your current carb unless it’s damaged, cracked, has broken screw holes, or is damaged beyond repair. 

In addition, aftermarket carbs may not be as reliable as OEM ones or ones sourced from specialist aftermarket businesses. 

A reliable rebuild kit, which includes jets is a great initial step in addressing the gas issue. Examine the tiny ports inside the carb. This includes the tiny holes through the middle and sides. 

Make sure that the jets are unplugged and cleaned. Also, look for the possibility of a fouled spark plug since it is a frequent reason for problems with carbs.

Idling Issues

Secondhand bikes can have this issue, especially that have engines that are swapped out by an ATV of a different make and model. In addition to fixing Yamaha Bear Tracker components like the battery and rebuilding of the carburetor (with the OEM kit obviously! )

Be sure to replace all switches as well as any circuits that are faulty and damaged within the bike. If you’re unable to set it to idle you must check the following:

  • Proper carb rebuild
  • Adjusted floating (so that the fuel does not overfill)
  • Unplugged pilot jet
  • New or working spark plug (get an operational OEM coil if your spark is weak).

Minor issues The engine starts faster when using an electric pull start than it does with the electric one. This can happen and requires inspection of the stator coil, the pickup coil, and the source coil (as heat destroys these parts in time). 

Also, make sure to test every section of the stator’s wires to be grounded (with the tester turned on to test continuity) to determine if there is an open circuit.

Yamaha Bear Tracker 250 Top Speed

Here are the specifications to refer to:

  • The Stator 0.45-0.55 from phase
  • Take coils: 189-231 Ohm Green or white stripe, the red or white stripe
  • Source coil: 270 – 330 ohm either orange or red to the black wire

Your quad could also have an underlying vacuum leak (revealed by the condition of the flange that connects to your intake) or an idle circuit. Clean the jet using carb cleaner or compressed air, an assortment of cleaning tools for the tip of your welding torch, and an untidy copper wire to remove your pilot’s port and connect it to its throttle body and other things. 

The service manual will give you an extensive explanation of the procedure to follow. Be aware it is required to wash the jet since gunk builds up and crystallizes. A simple spray of carb cleaner is not enough.

If the above steps don’t allow you to alter the idle speed you are likely to have the result of a compression issue. The most likely range is 120 and 130 psi. 128 is considered to be the ideal number.

So, any reading above the range of 120 to 130 psi would indicate worn-out rings, pistons, or valves that have not been set to the specifications.

No Spark

Examining the coils and stator is also a part of identifying this issue. In addition, you need to identify the year of manufacture of the Bear Tracker. Certain models feature an emergency start switch located in the left handlebars to stop the starter from engaging when not engaged.

A damaged neutral switch can have the same effect, aside from causing the dash light to blink. There should be the sound of clicking or buzzing emanating out of the solenoid. If not, the issue could be due to a starter relay issue or a connectivity problem. 

It is recommended to keep an instruction manual as well as a wiring diagram and a person to help you through this.

Other issues reported related to some of the issues reported with Bear Tracker – such as the flimsy rear end as well as the ignition issues – usually stem from wear and tear or abuse. On all forums and online resources, the most commonly reported issue of it is with its stator. 

You must examine the unit and make sure it is in good condition. Every Yamaha Bear Tracker 250 parts must be in good working order as well as the key mechanical components such as engines and differentials.

Where Is the Vin Number on a Yamaha Bear Tracker?

Finding the VIN on this vehicle is quite simple. Examine the left side of the four-wheeler. 

It should be at the lower right side in the left flap of the mud of the frame. You’ll need a high-quality flashlight to locate the VIN that is etched onto the frame. 

If you cannot find it in the exact location due to some reason, you can search for it on the plate on the bottom of the vehicle, or on the bar that nerfs. Be sure not to cross-check the VIN with the engine number.

About Yamaha

Yamaha Motor Company Limited has moved from manufacturing high-quality musical instruments, to becoming a well-known maker of multi-purpose engines, motorcycles as well as intelligent machinery, and other motorized goods. 

It was founded at Iwata, Shizuoka, Japan the famous Japanese company established its motorcycle division in the year 1955 after it was separated from its main company. Today, the manufacturer of the Yamaha Bear Tracker 250 continues to be a positive force in society via its involvement in the development of tourist companies and overseeing leisure, recreation facilities, as well as related services.

Conclusion – Yamaha Bear Tracker 250

It’s hard not to appreciate the Bear Tracker’s easy mechanics and single-cylinder semi-auto mechanical five-speed featuring shaft drive. Its interchangeable components and extensive aftermarket support make it a pleasure to repair and ride. 

The bike is more appealing to those who like old-fashioned rides with no frills and complex technological gadgets such as traction control. If you are in this category all you have to do is give the bike is regular maintenance and some love, and it will reward you with a lot of outdoor enjoyment.

What years did they make Yamaha Bear Tracker 250?

The Yamaha Bear Tracker 250 was the company’s first American-made ATV. The four-wheeler was small, but it featured a stunning engine brake system, rear and front racks for utility, and an impressive four-stroke engine. It was manufactured between 1999 and 2004 and was a massive success with the public.

Does Yamaha make a 250 ATV?

The Yamaha Raptor 250 will be the lightest sports all-terrain vehicle ever constructed. The quad is equipped with an engine with dual valves, a 4-stroke engine, top-of-the-line suspension, and an appealing design. It’s the best in its class and has outperformed similar and more oversized displacement vehicles since 2008.

What kind of oil does a 2001 Yamaha Bear Tracker take?

AMSOIL Synthetic Lubricants are the ideal solution for those who want to get the best from the 2001 Yamaha BearTracker 250. They can withstand high temperatures and strain caused by extreme riding or work even at extreme temperatures.

How much horsepower does a Raptor 250 have?

CT Racing has developed a High-put motor with close to thirty rear-wheel horsepower out of the small Raptor 250.

What size tires are on a Yamaha Bear Tracker 250?

22×7-10 & 22×10-10 Full Set Yamaha Timberwolf 250 Beartracker Sport ATV Tires.

Where is the VIN number on a Yamaha Timberwolf 250?

The identification number for the vehicle, The Yamaha Timberwolf, can be found on the left-hand side of the frame. It is also the side on which you will find the shifter. In the year in which the ATV was built-in, the VIN is stamped on the back or front wheel.

What year did Yamaha make the Grizzly 350?

This vehicle, which was manufactured from 2006 until 2013 (for 2007 and 2014 models), was available in thirty-five models as well as six trims over its lifespan base models with 2WD and 4WD with a green, blue and red finish, as well as 4WD and 2WD Camouflage trims and IRS-equipped versions of the base colors as well as Hunter Green.

Yamaha Bear Tracker 250 FAQ

1. How do you tell the year from a Yamaha VIN?

How Can You Determine the Year from a Yamaha VIN? Search at the 10th character in your Yamaha VIN to find the year the model was manufactured. If it’s between J and Y the year is 1998 and 2000, in turn. If it’s a number, for example, 2 would represent that year, 2002. while 5 will represent the year 2005 and the list goes on.

2. How much HP does a Raptor 250 have?

The Raptor 250’s power does not come from horsepower so much as its weight. It produces around fifteen horsepower in the stock version However, the entire thing weighs around 315 pounds. This is why people are so impressed with it-great control and handling, paired with a modest amount of power.

3. Where is the serial number on a Yamaha Big Bear?

Take a look on the left-hand side of the frame of your car in front of the tire on your front. If you don’t see it then you might want to inspect the frame’s lower rail underneath the engine. Your VIN is a 17 digit number that gives you details about the Big Bear as well as identifies it.

4. Where is the VIN number on a Yamaha Bruin 250?

Find your VIN code on the body of your ATV. The number will usually be located close to the front of the vehicle, on the left side of the switch lever. In addition, the title for an ATV will also include the VIN number.

5. Is a Yamaha Big Bear good?

It’s Yamaha Big Bear 400 was an extremely sturdy and reliable quad that could accomplish the task. Its power is a great trade-off to high-end speed, while its tough appearance, towing capabilities, and powerful engine were popular for the public. The people loved this car even with its flaws.

Leave a Comment